How to Deflate the Aerobed Extra Bed

The Aerobed extra bed is an inflatable twin size air mattress that inflates to full capacity in less than 60 seconds. The bed allows for temporary bedding if you do not have an extra bedroom or enough beds for guests. When not in use the Aero extra bed can be deflated, rolled up and stored compactly under a bed or in a storage closet. The Aerobed extra bed includes an electric pump that is used to quickly inflate and deflate the bed.

Air pump

Instructions

- 1
  Lift the protective cap on the inflation valve, located on the end of the bed.
- 2
  Locate the deflate port on the pump. The deflate port is located on the top of the pump and runs perpendicular to the inflation port.
- 3
  Insert the deflate port into the valve and then move the pump switch to the "On" position.
- 4
  Allow the bed to deflate and then turn the pump to the "Off" position.
- 5
  Roll the bed, starting at the opposite side of the valve, toward the valve, to further deflate the bed.
- 6
  Replace the valve cover when the bed is completely rolled.

Instructions for a Sleep Innovations Mattress Topper

Types of Sleeping Pads

Mattresses