How to Repair Kitchen Chairs

Broken Legs

• 1

  Remove the supports connected to the broken leg. They are either nailed or screwed in place.

• 2

  Take the broken leg with you to purchase a replacement at a local specialty woodworking store.

• 3

  Stain and finish the replacement to match the other chair legs.

• 4

  Verify the fit of the new leg by test fitting it in place.

• 5

  Bond the new leg to the chair by liberally applying liquid nails to each wood joint. Once you glue the pieces, add 1-inch wood screws to hold them together.

• 6

  Fill the screw holes with wood putty then add a dab of stain to match the putty to the chairs so the screw holes are not visible.

Cracked Legs

• 7

  Purchase at least 6 inches of wooden dowel rod that is 1/2 inch in diameter.

• 8

  Use a ½-inch drill bit to make a hole from the top of the chair down straight into the leg.

• 9

  Test fit the dowel rod by pressing it as far in as it will go. Mark a line using a pencil that is where you will need to cut the rod so that it does not protrude from the chair.

• 10

  Cut the dowel rod at the mark using a circular saw or handsaw.

• 11

  Dab liquid nails into the holes you drilled then onto the dowel rod itself. Then slide the dowel rod down into the leg, once the glue dries it will act as a brace for the broken leg.

• 12

  Cover the hole with wood putty and add stain if necessary to match the color of the chair.

Loose Joints

• 13

  Break the joint completely apart

• 14

  Place a small amount of liquid nails in the hole side of the joint, also place some on the piece that inserts in the hole.

• 15

  Affix the two pieces back together.

• 16

  Fortify the structure of the joint by inserting a 1-inch-long wood screw.

• 17

  Conceal the head of the screw with wood putty and a dab of stain to match the color of your chair.