Home Garden
# Home & Garden >> Furniture >> Kitchen Furniture

How to Attach a Kitchen Table to a Wall

Attaching a kitchen table to the wall provides a more permanent solution for kitchen seating. This is also a way for parents to childproof their kitchen by eliminating the possibility of the table tipping when a small child pulls on the edge.

Things You'll Need

  • Pencil
  • Stud finder
  • Wall bracket
  • Drill
  • 3-inch screws
  • 1/2-inch screws
  • Screwdriver
Show More

Instructions

    • 1

      Place the stud finder on the wall in the location where you want to attach the table. Slowly move the stud finder horizontally along the wall to locate two side-by-side studs.

    • 2

      Mark the stud locations using a pencil. A stud is needed to support the table's weight once it is attached. A typical drywall connection will not support the table.

    • 3

      Press the table edge to the wall with the base resting naturally on the floor. Line the wall bracket with the wall stud on the underside of the table. Draw a pencil mark on the wall through the bracket screw hole and remove the brackets.

    • 4

      Drill a hole through each marked location and replace the brackets. Drive one 3-inch screw through the bracket to attach it to the wall stud.

    • 5

      Drive one 1/2-inch screw through the top drill section on the wall bracket to attach it to the table.

Previous:

Next:

Kitchen Furniture
  1. How to Decorate a Kitchen Console
  2. How to Redo a Kitchen Table
  3. How to Seal a Kitchen Table
  4. How to Design a Kitchen Table
  5. How to Extend a Kitchen Table
  6. How to Finish a Kitchen Table
  7. How to Attach a Lattice to a Wall
  8. How to Decorate a Wall Behind a Kitchen Table
  9. How to Attach a Hutch
  10. How to Attach a Folding Table Top to a Wall
  11. How to Attach Rafters
  12. How Do I Stain a Kitchen Table?

Home Garden © https://www.98905.com