Instructions for Convertible Cribs

Converting Crib to Toddler Bed

• 1

  Make sure you have purchased any additional materials you need for the crib conversions, such as an additional piece of panel. Check the crib instructions. Some crib instructions can be found on the bottom of the mattress panel of the crib. If you are unsure or have no instructions, inquire with the crib manufacturer on your specific crib model.

• 2

  Make sure the mattress is in the lowest position possible. Take off the front panel of the crib by unscrewing the bolts. The type of bolts that your crib has depends on the manufacturer crib type. Some cribs may come with a specific screwdriver for the bolts.

• 3

  Remover the center panel from the side posts by unscrewing the connective bolts on each side post. Attach the toddler rail to the center panel with the bolts you just removed. Attach the toddler rail and posts to the side panels of the crib.

Conversion to Full Bed

• 4

  Remover the front and back panels from the side panels of the crib. Remove the center panel. Put the bed rails evenly on the side of the crib.

• 5

  Connect the bed to the front and back panels using bolts. If you have bed slats, lay them on the ledgers of the bed rails and space them evenly.

• 6

  Tighten the all bolts into the bed ledgers. Make sure all bolts are tightened with a wrench.