Instructions for Bassett's Furniture Crib

Preparing for the addition of a brand new family member can be an exciting and busy time. One of the many important tasks to complete before your baby arrives is the selection and assembly of a crib.

Bassett Furniture is a popular manufacturer amongst families, as it devotes an entire selection of furnishings to babies. The Bassettbaby line offers several collections for parents to choose from and can be easily assembled at home.

Bassettbaby crib and included hardware
Owner's manual and instructions
Metric Allen wrench
Standard size screwdriver
Hammer

Instructions

- 1
  
  Read through the enclosed owner's manual and instructions before starting your assembly.
  
  Fasten the crib's headboard and footboard to the stabilizer bars, using the screws included in the box. Secure the screws by placing a nut and washer on either side of the board and stabilizer bar connection. Tighten with a wrench.
- 2
  
  Make sure all screws and bolts are firmly tightened.
  
  Lower the spring frame inside the crib until it rests firmly on the stabilizer bars. Use the enclosed screws and nuts to fasten the spring frame to the stabilizer bars. Carefully tighten with a wrench.
- 3
  
  Your baby's brand new crib is ready to be used.
  
  Slide the crib's side rails in, one at a time. Fasten them to the support rails, headboard and footboard with the enclosed screws and bolts. Tighten with the wrench.
- 4
  Place the crib's mattress inside the crib (if one was included).

USA Consumer Safety Specifications for Bunk Beds

Instructions for a Stokke Chair

Kids Furniture