# How to Convert a Graco Ashleigh Bed
A Graco Ashleigh bed starts as a convertible crib for infants. As your infant turns into a toddler, you can convert the crib into a toddler bed. The process for converting is very simple, as it only requires you to remove the front panel of the crib. The back panel and side panels stay attached. This design makes converting the bed a project that will only take several minutes to complete.
Things You'll Need
- Pliers
Instructions
-
-
1
Pull the front panel to the upright and locked position by pulling in on the levers on the side and then by pulling up on the panel. Let go of the levers to lock it in place.
-
2
Locate the two tabs pressed into the front panel-sliding rail on each side of the crib and pull them out with a pair of pliers. You can try to pull them out with your fingers, but they are relatively small and hard to grip. Pull straight out to avoid breaking the tabs.
-
3
Push in on the locking levers and lower the front panel down until the sliders mounted on the panel drop off the bottom of the sliding rail.
-
4
Tilt the top of the front panel forward and remove it from the crib. This step completes the conversion from crib to toddler bed.
-
1
Kids Furniture
- How to Convert the Graco Classic Crib Into a Toddler's Bed
- How to Convert a Dropside Crib to a Toddler Bed
- How to Convert a Graco Lauren to a Full Size Bed
- How to Convert Delta Cribs to a Toddler Bed
- How to Convert a 4-in-One Crib Into a Toddler Bed
- How to Convert a Simplicity 3-in-1 Crib to a Transitional Bed
- How to Convert a Wendy Bellissimo Baby Bed to a Toddler Bed
- How to Convert a Simmons Crib to a Bed
- How to Convert a Crib Into a Full-Size Bed
- How to Convert a Waverly Crib to a Toddler Bed
- How to Convert an Evenflo Crib Into a Toddler Bed
- How to Convert a Munire Crib to a Toddler Bed
