How to Use Hi-Gloss Glaze Spray

Maintaining a protective coating on your objects or furniture is possible with the use of a hi-gloss spray. Hi-gloss glaze lacquer is best used on wood products, and can be dispensed from a spray gun in aerosolized fashion. Spray guns project the coating outward through a nozzle. Spray guns and lacquer are available at any home decor or maintenance store and can be stored in garages, sheds, basements or underneath a kitchen sink when not in use.

Hi-gloss glaze lacquer
Air-powered spray gun
Air hose
Mask
Safety goggles
Gloves

Instructions

- 1
  Take your furniture and tools outside. Twist open the lid on the back of an air-powered spray gun. Pour the hi-gloss glaze lacquer into the tank until full. Reattach the lid. Adjust the air flow and fan pattern settings with the knobs on the gun.
- 2
  Place a safety mask and goggles onto your face. Pull on a pair of safety gloves.
- 3
  Aim the nozzle of the spray gun 5 to 10 inches from the surface of the object.
- 4
  Press the nozzle to power the gun. Spray the glaze directly onto the furniture. Move the nozzle back and forth and/or up and down in constant motion. Evenly spray hi-gloss glaze until the surface is completely covered. Cover all sides of the surface if the object is three-dimensional. Increase or decrease pressure on the nozzle to manipulate the gun's spraying power.
- 5
  Allow 1 to 2 hours for the glaze to dry.

How to Use Cardboard to Make a Mail Organizer

How to Replace a 3.5 Inch Gas Cylinder in an Office Chair

Home Office Furniture