# How to Make a Board to Cover a Dining Table Top
Many people use their dining room tables only on formal occasions, and the tables tend to be more delicate and decorative than kitchen tables. Placemats and tablecloths will help protect the surface; however, for total protection many cover the dining table with a matching board.
Things You'll Need
- Tape measure
- Wood piece the size of your table (see Step 1)
- Circular saw
Instructions
-
-
1
Measure the length and width of the dining room table. Write down the measurements.
-
2
Purchase a piece of wood that is the dimensions of the dining room tabletop. If there is not a precut piece of wood in the same size, buy a slightly larger piece of wood.
-
3
Size the board. Use a pencil and a level to create an outline on the board that is the same dimensions as the dining room tabletop. Use a circular saw and start cutting from the edge of the board. Cut on the outside (the right side) of the outline.
-
4
Sand the edges of the board. Stain or paint the board to match the dining room table. Allow to dry and apply a second coat if needed.
-
1
Previous:
Dining Room Furniture
- How to Make a Dining Table Top from Walnut Planks
- How to Make a Wall Mounted Dining Table
- How to Make Dining Table Pads
- How to Make a Round Dining Table
- How to Make a Dining Room Table
- How to Make a Dining Table Expand
- How to Make a Dining Table Sketch
- How to Make a Dining Table Top
- How to Make a Laptop Table
- How to Make a Square Table Cover
- How to Tile a Dining Table Top
- How to Make a Card Table
