Remove the desk, legs and glass plate from the box. Locate the plastic bag with the hardware. Set the glass in a safe place and set the top of the desk on a stable surface. Flip the top into an upside down position.
Grab one of the legs and align the pre-drilled holes with the pre-drilled holes on one corner of the desk. Hand tighten two bolts in the holes and use a crescent wrench to completely tighten the bolts.
Repeat the bolt attachment for each of the three remaining legs. Double check all of the bolts to ensure they are tightly screwed against the sides of the desk.
Locate the three extra pieces of wood included in the package. The wood is used as a horizontal framework on the legs. Fit the two short pieces on each side of the desk, running from the front leg to the back leg. Slide the pieces into the indentation on the legs and use the screw driver to attach a single screw for each end of the wood. Attach the long piece to the two back legs.
Flip the desk upright and move to the desired location. Set the glass on the rectangular impression to complete the desk.