iJoy-250 Massage Chair Instructions

Assembly

• 1

  Insert the cup holder liner into the cup holder on the left arm. Place the cup holder lid over the cup holder.

• 2

  Insert the two posts on the bottom of the headrest into the two tube openings on the top of the iJoy-250 backrest.

• 3

  Flip the "Child Safety Lock" up to unlock the master switch on the side of the chair.

• 4

  Plug the iJoy-250 Turbo into a compatible AC power outlet.

• 5

  Push the "On" portion of the "Master Switch" down to turn the machine on. The "Power" LED light on the remote control will be green when the master switch is flipped on.

Operating the Controls

• 6

  Select one of the three "Programs" buttons on the remote control to enjoy a 15 minute long, programmed massage. The three program buttons are full, upper and lower. The "Full" program provides a series of movements along the entire region of the back, or you can select the "Upper" or "Lower" buttons to concentrate on just one region of the back.

• 7

  Choose just one type of massage. The "Auto" section of the remote contains kneading, compression, percussion and rolling. The kneading is designed to feel like a person's thumbs pressing firmly into both sides of the spine. Compression is designed to feel like someone is alternating and pushing the heel of each hand into the muscles on the sides of the spine. Percussion emulates hand fists beating rapidly into the back. Rolling moves the massage rollers up and down the back.

• 8

  Change the position of the "Auto" massage by pressing the "Up" and "Down" arrows in the "Manual" section.

• 9

  Move the position of the chair by pressing the "Forward" and "Backward" arrows to shift the chair's recline.

• 10

  End the massage by pressing the "Stop" button.