Novimex Office Chair Assembly Instructions

Unpack your Novimex office chair from its box and place the parts on a sturdy work surface such as a desk or table.

Turn the star-shaped base assembly upside down and insert the wheels into the holes at the ends of the base assembly. Press the wheels down firmly until they pop securely into place. Turn the base assembly right-side up.

Locate the metal support cylinder and slide it into the hole in the center of the base assembly so that the thin part of the cylinder is sticking up.

Fit the end of one of the chair arms into the hole on the side of the side pan. Slide the arm into the hole until the screw holes in both the seat hole and the arm hole line up.

Use the included screws to secure the arm to the chair. Repeat the process with the remaining arm.

Slide the backrest into the port on the top of the seat so that the screw holes line up. Use the included screws to attach the backrest to the seat.

Fit the seat portion of the chair over the cylinder so that the hole in the bottom of the seat attaches to the cylinder. Push down on the seat firmly to secure the two pieces of the chair.