# How to Change the Handle on a La-Z-Boy Recliner
La-Z-Boy recliners are convenient pieces of furniture when you want to prop your feet up while watching television or just relaxing. The foot rest moves up and down with assistance from the handle on the right side of the recliner. Over time the original handle wears down where it connects to the chair. Changing the handle on a La-Z-Boy recliner is the best way to ensure your recliner operates correctly each time you use the chair handle.
Things You'll Need
- T30 Torx driver
Instructions
-
-
1
Place the La-Z-Boy recliner in the sitting position with the foot rest in the down position. Tilt the recliner forward so the front of the recliner is on the floor and the bottom is facing you.
-
2
Find the screw securing the recliner handle to the handle stem. The screw is on the back of the handle, pointing to the back of the recliner. Remove the screw with the T30 Torx driver.
-
3
Pull the handle and the handle cover plate off the handle stem. Slide the new cover plate over the handle stem and against the side of the recliner.
-
4
Slide the new handle over the handle stem, with the hand grip end pointing toward the front of the recliner. Secure the handle with the securing screws. Rotate the recliner back to the upright position.
-
1
Chairs
- How to Replace the Cushion on a La-Z-Boy Recliner
- How to Adjust the Pitch of a La-Z-Boy Recliner
- How to Adjust the Handle on a La-Z-Boy Reclining Chair
- How to Remove La-Z-Boy Recliner Handles
- How to Adjust the Reclining Tension on a La-Z-Boy Recliner
- How to Tighten a La-Z-Boy Recliner Back
- How to Adjust the Foot Rest on a La-Z-Boy Recliner
- How to Repair a Recliner Chair Handle
- How to Detach a Recliner Handle
- How to Change the Handle on a Maytag Microwave
- How to Replace the Pull Handle for a Recliner
- How to Change the Handle on a Kwikset Door Knob
