# How to Remove the Seat of a Lazy Boy Chair
La-Z-Boy chairs include seats that are fastened to the rest of the chair with bolts, which help to always keep the seat in place and not slide off. If you need to remove the seat cushion to repair or replace it, then you also must remove the spacer brushing parts on the swivel base bottom in order to fully remove the seat. It can also be helpful to remove the seat if you need to clean the inside of the chair or repair any other parts.
Things You'll Need
- T-30 Torx driver
- Socket wrench
Instructions
-
-
1
Lift the front of the La-Z-Boy chair when it is in the closed position; allow for the foot rest to pop open.
-
2
Lift the front until the back of the chair goes as far as it can. Then lay the chair on its back so that you have access to the bottom of the chair.
-
3
Remove the two truss head screws from the top bottom of chair using a T-30 Torx driver.
-
4
Remove the two spacer brushings located between the base bottom and glide base subassembly.
-
5
Stand the chair back into the upright position and then lift the front of the seat to the top of the arm rests.
-
6
Remove the bolts at the rear of the seat using a socket wrench. Then lift the seat completely off of the chair.
-
1
Previous:
Next:
Chairs
- How to Adjust the Tilt on an Office Chair
- How to Replace the Hydraulic Cylinder on a Computer Chair
- How to Do the Corners on a Vinyl Upholstered Chair
- How to Form the Rounded Corners on a Vinyl Chair Cover
- How to Assemble a Recliner
- How to Make a Woven Chair
- How to Weave a Chair
- How to Plump Up Chair Cushions
- How to Remove the Back of a Berkline Recliner
- How to Cover a Chair Seat for the First Time
- How to Replace the Springs in a Lazy Boy Chair
- How to Remove the Base of an Office Chair
