Insert fresh 9-volt batteries. Your batteries should last about six months and a low-battery light will indicate when it is time to change them again. Press any button to wake your remote.
Press the fill button to completely fill the chambers. This will fill the mattress to its maximum capacity, 100. It is recommended by the manufacturers that you start here to find your perfect sleep number.
Tap the softer button until you find a sleep number that is comfortable for you. If you go past your sleep number or feel that the mattress has become too soft, you can press the firmer button to increase the firmness of the mattress. Continue to adjust the mattress firmness until you have found your best level of comfort.
Insert fresh 9-volt batteries. Your batteries should last about six months and a low-battery light will display on the remote when it is time to change them. Press the L or R button to wake the remote.
Press the fill button for two seconds to fill both chambers of the bed or select the L or R button to fill only one side of the bed. This will fill the bed to maximum capacity, 100. The manufacturer recommends that you start here to find your perfect sleep number.
Press the L or R button to adjust the firmness of each side of the mattress. You will have to do each side individually.
Tap the softer button to decrease the firmness of the mattress until you find your perfect sleep number. If you feel that the mattress has become too soft or you have passed your sleep number, tap the firmer button. Continue to adjust the mattress firmness until you find your perfect sleep number.
Press and hold the Memory button for three seconds to set your sleep number in the remote's memory. A "Memory Set" indication should appear in the display above your sleep number when it is registered in the remote. If you have a dual chamber remote, you will have to press the L or R button before pressing the memory button to set the firmness for each side in the remote memory.
Press the Memory button twice within five seconds to recall your stored sleep number on a single chamber remote.
Recall your memory setting in a dual chamber remote by selecting the L or R button and pressing the memory button twice within five seconds.