How to Build a Wood Makeup Vanity Table

Measure the space for your table. Design a makeup table on paper to work in a bedroom space without overpowering the room. Either a square or kidney-shaped top is acceptable, and the table might have one or more drawers. Cut out paper templates that will serve as pattern pieces.

Assemble all wooden boards needed for the top. Glue and clamp boards to create a flat plane for cutting. After the surface is dry and solid, trace the top of the vanity table on the surface and cut. Alternatively, use half-inch thick plywood for the top. Cut the top with a jigsaw if you are making a kidney-shaped vanity table. A tabletop saw will work on a square top. Sand all surfaces.

Use a drill bit and attachment to create holes for wooden legs to fit into the top. Or, build solid sides and a back from wood boards or plywood that is sanded smoothly. Glue and screw the sections into place to form a base under the top.

Create one or more drawers by cutting a front surface with spaces left for the drawers. Install wood framework to hold the drawers and metal tracking for the drawers to slide on. Build the drawers separately, or use drawers you already have and design the table around their measurements.

Stain or paint the makeup vanity table. If you plan to leave the top bare with no type of covering, apply a couple of coats of sealer. This enables someone applying makeup to wipe up spills easily. If the table is square, consider installing small or large tiles. Mirror tiles can be installed to create a top as well.

Place the small stool in front of your vanity table and enjoy.