Attach the stationary side to the two end panels. Remember to use an Allen key wrench and the bolts packaged with the crib to put the entire crib together.
Attach the stabilizing bar to the end panels.
Put the mattress support piece on the four corner posts. Tighten the bolts to make sure it's stable.
Place the drop-side piece of the crib from the bottom onto the drop-side upper and lower tracks to the left of the lower tracks and pull toward yourself. Raise the drop side until you feel it lock into place. Put the rubber stoppers into place before raising or lowering the drop side. The rubber stoppers will prevent the drop side from crashing to the floor.
Tighten all bolts.
Insert your mattress into the crib. The crib is now ready for use.