How to Assemble a Bellini Crib

Remove all the parts from the packaging. Take time to become familiar with the parts and components before you begin assembling the crib.

Install the drawer guides by mounting them along the bottom of the headboard and foot board, using the provided wrench labeled B and screws labeled A. Tighten the screws into the lowest inside holes of the panels.

Attach the headboard and foot board to the stabilizer bars. Place the plastic washers labeled D around the screws labeled E. Insert the screws through the holes on the outside of the headboard and into the stabilizer bar. Tighten the nut labeled C onto the screws with the wrench labeled F.

Place the dust cover on the dust cover supports.

Lay the spring frame onto the stabilizer bars. Attach the lower spring frame brackets to the stabilizer bar. Use the the screws labeled H and the nuts labeled G and tighten the screws with the wrench labeled B. The nuts should be located on the inside of the stabilizer bar. Mount the adjustable upper arm of the spring frame at the desired height.

Tighten the screws labeled X and Y into the upper and lower headboard holes. Tighten them with the wrench labeled B.

Attach the front and back sides of the crib. Line up the dropside with the crib ends. On both ends of the dropside, find the hole labeled W and place a screw labeled X into the the hole. Depress the pin of the screw labeled Y and place it into the bottom of the dropside guide.

Affix the casters to the crib feet. Use a block of wood as a buffer between the caster and the hammer. Tap the caster gently into place.

Piece the drawer back, sides and center together and secure them with the metal tabs on the drawer back. Slide the drawer bottoms all the way into the grooves on the drawer sides. Secure the front of the drawer with the metal tabs on the drawer sides. Slide the drawer into the guides on the underside of the crib end panels.