Home Garden

How to Make a Handrail on Existing Concrete

Handrails are an important part of any structure requiring climbing. Stairs can cause injury that can be avoided by installing a handrail. This can prove to be a challenge if the steps or stairs are concrete. However, with the proper instruction and tools, the do-it-yourself homeowner can install a handrail that will make her feel proud. The basic tools needed are a drill bit designed for concrete or masonry and a ½-inch drill. These two tools will make the project proceed without too much frustration. The minimum height for a handrail is 42-inches.

Things You'll Need

  • ½-inch Variable Speed Drill
  • Masonry Drill Bit
  • Brackets for Posts
  • Posts
  • Wrench
  • Allen Wrench
  • 2 Swivel Sockets
  • Top Rail
  • Concrete Toggle Bolts and Nuts
Show More

Instructions

    • 1

      Place the brackets on the steps for the handrail to give the support needed when used. Mark the holes where the brackets will be secured to the concrete and drill the holes with the masonry bit.

    • 2

      Insert and screw the toggle bolts into the holes. Next, secure the brackets to the steps with the nuts.

    • 3

      Install the posts of the handrail by securing them to the bracket with an Allen Wrench. Next, install the swivel sockets to receive the top rail.

    • 4

      Secure the top rail to the vertical support pieces by slipping it into the swivel sockets and tightening the swivel sockets into position with the Allen Wrench.