Cut a length of rope one foot longer than the width of your gate.
Thread the rope through the handle of the kettlebell. Kettlebells are weights found in the fitness or sporting goods aisles of department stores or at sporting goods stores.
Use a slipknot to anchor the kettlebell in the center of the length of rope.
Tie one end of the rope to the top center of the gate. If there is no obvious place to tie the rope, you may wish to attach an eye bolt to the inside of the gate and fasten the rope to that.
Dig a fence post hole a distance from the hinge post equal to half the width of the gate. An imaginary line between the fence post hole and the hinge post should form a right angle in relationship to the gate, with the hole situated on the side of the fence opposite the direction in which the gate swings.
Insert the fence post in the hole, and secure it with dirt or crushed gravel.
Attach the eye bolt near the top of the new fence post on the side closest the fence.
Thread the rope through the eye bolt, and tie it in place. At this point, when the gate is shut the kettlebell should continue to be suspended somewhat above the ground and not rest directly on it. If not, re-tie the ends of the rope to situate the kettlebell above the ground and exactly in between where it is tied to the gate and tied to the anchoring fence post.