How to Mount Gladiator Cabinets

Gladiator Garageworks is a garage storage and organization systems manufacturer that is part of the Whirlpool Corporation and is located in Benton Harbor, Michigan. Gladiator makes a number of residential-grade and commercial-grade organization and work garage components such as workbenches, tool storage systems, wall systems, organization kits and cabinets. Among the Gladiator cabinets are wall-mounted organizers that hang from a garage wall to store tools. Mounting a Gladiator cabinet is straightforward and requires a few tools.

Gladiator cabinet
Hand towel
Mounts
Pencil
Masonry bit
Drill
Safety glasses
Plastic anchor
Screws
Screw gun

Instructions

- 1
  Unpack your Gladiator cabinet and lay the components out on a workbench or table for easy access. For best results, lay a towel on the table or workbench beforehand so you can easily identify each mounting component.
- 2
  Decide where to hang your Gladiator cabinet, then hold the mounts against the wall and mark the holes in the brackets on the wall with a pencil. The best place is just over or right beside an electrical outlet for easy use of the tool chargers you will store.
- 3
  Pick a masonry drill bit one size down in diameter from the diameter of the screws enclosed with your Gladiator cabinet and attach it to a drill. Tighten the chuck to hold the masonry bit securely in the drill.
- 4
  Put on safety glasses. Drill pilot holes in the garage wall where you made the pencil marks using the drill, then insert plastic anchors in the pilot holes.
- 5
  Affix the cabinet mounts to the wall using screws and a screw gun, then hang your Gladiator cabinet on the wall.
- 6
  Place your hand tools and power tools along with chargers into the Gladiator cabinet to finish the installation.

How to Drop a Wire From the Attic

How to Design a Freestanding Room Divider

Room by Room Remodeling