How to Build a Cinder Block Wall With a Curve

Outline the borders of your wall with a garden hose to help you dig the footer area. All block walls require a footer to help spread the weight of the wall over the ground so they don’t sink into the soil. The footer should be twice as wide as the thickness of the wall and should be deep enough to go below the frost line, which is around 8 to 10 inches deep. Dig down with a shovel to clear the footer area.

Remove the garden hose and mix up some mortar in your wheelbarrow with the shovel. Follow the directions on the bag (differently sized bags have different water requirements and vary depending on the manufacturer), dump the mortar into the trench and let it harden to create the footer.

Mix up some more of the mortar mix on the following day and use this for your block wall. Shove an inch or so of the mud onto the top of the footer and set your first row of blocks along the radius of your curved footer. Center the blocks on top of your footer. Allow one-half inch between each block for mortar. Tap them together with the mallet and use the level to guide you as you tamp the blocks down into the base layer of mortar.

Add another row of blocks on top of the first, with another three-quarters to 1 inch of mortar laid on top of the first row of blocks. Alternate the blocks so that the vertical joints do not line up. Tamp them in place with the mallet and repeat the process for each subsequent row. Check the wall for plumb with your level every three or four rows and adjust as necessary.