Installation of an LDR Faucet

LDR faucets are a designer brand of faucets that can be installed in bathroom and kitchen sinks. If you have an old faucet that needs to be replaced then you can purchase a new LDR faucet online or from your local home improvement retailer. The LDR faucets can be installed into your sink the same way as another type of faucets, but it's important that you also refer to the installation manual that comes with the faucet that you purchase.

Pipe wrench
Basin wrench
Silicone caulk
Caulking gun

Instructions

- 1
  Open the door below your sink, and turn the water-supply valve to the "Off" position.
- 2
  Disconnect the garbage disposal from the drain pipe assembly using a pipe wrench, and lift out the garbage disposal.
- 3
  Remove the shank washers at the bottom of the sink, within the cabinet, using a basin wrench, and then lift out the old faucet from the sink.
- 4
  Disconnect the water-supply tube from the bottom of the sink using a basin wrench.
- 5
  Apply a thin layer of silicone caulk to the base of the new LDR faucet using a caulking gun.
- 6
  Place the new LDR faucet onto the sink, and line up the faucet so that it fits properly.
- 7
  Reconnect the water-supply tube to the bottom of the sink, and make sure the pipe is firmly tightened using your basin wrench.
- 8
  Reinsert the shank washers to the bottom of the sink, and then reconnect the garbage disposal.
- 9
  Turn the water-supply valve to the "On" position, then test the water to make sure it comes out of the new faucet.

How to Do a Concrete Overlayment on Tile Countertops

How to Brace a Laminate Countertop

Kitchens