How to Grade Basements

Grading for surface drainage is one of the measures required to keep the basement dry. Concrete is a porous material, and runoff from rain and melting snow can penetrate basement walls if it collects around the foundation. Building regulations call for grading an apron around the foundation walls, sloped to a specified percentage to direct runoff away from the house. Grading requirements vary from region to region, and local building codes should be consulted before starting the work. Finish soft or hard landscaping can be installed on the graded surface.

Well-drained gravel, crush or road mix type
Skid steer loader
Reversible plate compactor

Instructions

- 1
  Remove soft soil and organic material within the area that's being graded around the basement wall. Replace with well-drained gravel, using the skid steer loader to place the gravel in 6-inch lifts, or layers. Compact each layer with the compactor.
- 2
  Leave 8 inches of the foundation wall above grade. Grade the surface away from the wall, with a minimum 5 percent grade -- 3/4 inch drop per foot -- for at least 5 feet. Ensure that surface drainage flows away from window well, exterior stairs and decks.
- 3
  Slope away from the house with a minimum 1 percent slope, where a patio or walkway is planned. Compact the ground well to establish a stable base for concrete or brick.
- 4
  Direct the drainage toward a swale or ditch that carries runoff away from the house. Ensure only your own property is impacted by the runoff.
- 5
  Spread decorative gravel or topsoil for sod or seed, or add hardscape features as desired. Maintain the established slope for the finish work.

DIY Exterior Cedar Wall

How to Insulate Concrete Form Systems

Home Building