Do it Yourself Widescreen TV Cabinets

Write down the measurements of the TV. You need the height, length and depth of the TV. The owner's manual will have these dimensions. If you do not have the manual, measure the TV with a tape measure.

Measure how tall you want the TV to stand off the ground. If you have a high-sitting couch, then you will want the stand to sit fairly high. If your couch sits low off the ground, then you'll want the couch to sit low. Determine how high you want your TV dimension to be, relative to the height of the TV.

Cut two pieces of plywood for the width, height and depth of the TV with the table saw.

Create a box by gluing the height and depth pieces together with wood glue. Nail the edges together with nails and a hammer. Glue one of the pieces of wood cut for the length on top of the box. Once the glue dries, nail the corners into the box.

Cut two more pieces. One for the depth and one for the height.

Nail the pieces on the top of the box.

Place the last piece of wood cut for the length on top of the pieces you just nailed down and glue it into position. After the glue dries, nail all four corners down.

Move the cabinet outside or in a large garage.

Coat the cabinet with paint or wood stain using the paint brush. Paint even strokes using medium speed and pressure. Do not miss any spots.

Dry the cabinet for a few hours.