# How to Cut Designs in a Concrete Driveway
Concrete is among the most commonly used materials for paving driveways because of its durable and long lasting nature. However, most concrete driveways are installed on a budget and can lack a degree of creativity and originality. This issue is one that can usually be remedied cost effectively and quickly. Using only basic tools, it can be accomplished by just about anyone by cutting a seemingly endless combination of lines.
Things You'll Need
- Circular saw with concrete blade
- Chalk line
- Tape measure
- Lumber crayon
- Garden hose
Instructions
-
-
1
Lay out the design to be cut in the driveway, locating and marking the corners using the tape measure lumber crayon, and then snapping cut guide lines using the chalk line.
-
2
Set the depth of the saw blade to 1 inch; this shallow depth will avoid cutting any reinforcing steel that is run throughout the driveway. Stretch the garden hose to the cutting area, with enough slack to be able to span the driveway.
-
3
Set the saw on the first line to cut (which line you cut first is not important), and gently push the running blade through the line. Keep the garden hose running at a trickle to help minimize dust while cutting.
-
4
Repeat Step 3 on remaining cut lines and rinse the driveway thoroughly with water when finished to wash away any dust and chalk.
-
1
Next:
Driveways
- How to Cut a Concrete Brick
- How to Cut Pavement for Driveway Lights
- How to Repave a Concrete Driveway
- How to Cut Concrete Stepping Pavers
- How to Cut Control Joints in Concrete
- How to Save on a Concrete Driveway
- How to Edge a Concrete Driveway
- How to Cut a Concrete Driveway for Repair
- How to Paint a Concrete Driveway
- How to Cut Costs on Paving a Driveway
- How to Break Up a Concrete Driveway
- How to Cut Concrete
