How to Resurface Concrete Driveway Spray On

Clean the driveway with a high-pressure hose and hot water to remove dirt and debris.

Brush concrete primer onto any cracks.

Cut out fabric strips or anti-fracture membranes in roughly the same size and shape of the cracks. The fabric is available at hardware stores and is designed to reinforce cracks.

Apply the fabric onto the primed cracks.

Apply the elastomeric base coat over the fabric sections.

Mix polymer concrete, following the manufacturer's directions.

Apply polymer concrete over the cracks and smooth it out with a taping knife. Let it dry.

Fill in any holes with epoxy mortar and smooth them out with a taping knife.

Use a concrete grinder to smooth out any rough patches on the repaired cracks.

Apply concrete primer to the rest of the driveway with a paint roller.

Fill a hopper spray gun with polymer concrete.

Spray an even coat of concrete over the driveway.

Use a trowel to texture the sprayed-on concrete.

Paint the driveway with concrete floor paint and finish with concrete sealer. Let it dry for two to three days.