How to Make a Game Rack

Organize your gaming gear without sacrificing floor space. Storing your games, puzzles or even consoles and controllers on your wall with a game rack is a convenient option for smaller living spaces. Build your own game rack easily using a simple design, basic wood materials and hardware. Secure your game rack to your wall and it will serve as a functional storage area for many years to come. A game rack like this can be built and installed in less than an hour spent in any work shop.

Tape measure
2 pine boards, 1-by-10-by-20 inches
2 pine boards, 1-by-6-by-10 inches
Pine board, 1-by-6-by-18 inches
Screw gun
16 wood screws, 3-inch
Stud finder
Level
4 wood screws, 5-inch

Instructions

- 1
  Set the two 20-inch boards on edge, parallel and spaced 6 inches apart. Position the 1-by-6-by-10-inch boards between them at right angles so the boards are on end and flush with the ends of the 20-inch boards. Screw through the 20-inch boards and into the edges of the 6-by-10-inch boards. Use 12 screws for this task. This is the frame to your game rack.
- 2
  Lay your frame flat so it is resting on either set of edges. Place the 18-inch board between the 6-by-10-inch boards at a right angle so it is laying flat. Screw through the 6-by-10-inch boards and into the ends of the 18-inch board. Use two screws for each end.
- 3
  Locate studs in the wall where you wish to mount your game rack. Position your game rack against the wall using your level on top of the 20-inch board to ensure that it is horizontal. Screw two screws through the 18-inch board and into each stud to secure the game rack to the wall.

Numerical Methods in Heat Transfer

Roofing Felt Importance

Building Designs