# How to Make a Shower Curtain When You Don't Have Rings
Shower curtains are usually hung up on rods with large rings, but if your shower rod is removable, it’s not always necessary to create a shower curtain that way. Instead you can make a shower curtain like you would a normal curtain, with a fabric channel for the shower curtain rod to slip into. When making a shower curtain without rings, it’s best to use a waterproof fabric so the shower curtain won’t leak and make a mess in your bathroom.
Things You'll Need
- Measuring tape
- Waterproof fabric
- Scissors
- Pins
- Thread
- Sewing machine
Instructions
-
-
1
Measure the length and width of your shower. Measure the width of the shower rod in your bathroom as well.
-
2
Cut out a piece of waterproof fabric that is about 8 to 10 inches longer than your shower and 1 foot wider.
-
3
Fold over the top of the fabric by 4 or 5 inches and pin it in place. The tunnel for the shower rod should be about 1 inch larger than the shower rod is wide so it’s easy to move.
-
4
Sew the fabric in place, tucking under the raw edge with a ¼ inch seam allowance. Use a straight stitch on the sewing machine.
-
5
Remove the shower rod from the shower and slip the shower curtain onto the rod. Place the rod back into the shower.
-
1
Bathrooms
- How to Make a Horizontal Shirred Curtain
- How to Make a New Hole in a Shower Curtain
- How to Compact Earth When You Don't Have a Compactor
- How to Make a Shower Curtain Rod for a Clawfoot Tub
- How to Make a Sheer Door
- How to Make a Shower Tension Rod
- How to Make a Corner Curtain
- How to Make a Linen Shower Curtain
- How to Make Curtain Rings Slide Better
- How to Make a Bed Canopy Using a Circle Shower Rod
- How to Decorate When You Don't Have White Trim
- How to Make a Shower Curtain Rod for a Travel Trailer
